This is our new GDome GoPro Dome Housing for the GoPro Hero 4 / 3+ / 3 / Hero + and Hero.

The PDS (Professional Dome System) has reached nearly two years in the making! We have added all the features needed to create an unrivalled Dome System that is affordable and easy to use, while offering industry-leading optics.

With this Dome Housing, getting the elusive under-over shot, also known as 50/50 or split shot, has never been easier. Using your GoPro’s near-infinite depth of field and wide-angle lens allows you to easily create high-quality videos and stills, rather than spending $2000 on DSLR setups that face the complexity of accounting for depth of field, focus and exposure. This spacing also improves water shots above the water: water spray or droplets that would have covered most of the lens (ruining the shot or video) are now just small dots in the field of view. The gap between the lens and dome move water particles further away from the camera lens, enabling underwater images to become cleaner. The field of view is also drastically improved.

The GDome system uses unique O-Ring compression seals between the Dome and the BackPlate, as well as around the side of the camera lens. No silicone or glue is used to create a seal. We pressure test every Dome to the relevant housing's / camera's maximum depth before it leaves the factory. It is thus a guarantee that your received dome will not leak! Enjoy sharper, cleaner GoPro images at depths that no other dome can reach! As the PDS is made up of completely detachable parts, you can easily service, buy spares and even upgrade your Dome Housing.

INCLUDED IN THE BOX :

Complete Hero 4/3+/3 PDS Dome
Various Stainless Steel Screws
1 x Allen Key
2 x Camera Lens Seal
1 x Dome to Backplate O-Ring Seal
Instructions and Warranty Information

KEY PRODUCT FEATURES:

Individually pressure tested to 40m
Split Shots Unbelievably Easy To Get
Close To 30% Improvement In Camera Field of View When Underwater
Drastic Focal Length Improvement For Underwater Shots
Optically Correct Dome
Full Access To All Housing Buttons
Split Line Indicator Engraved On BackPlate
O-Ring Compression Seals System – No Silicone Or Glue Is Used To Create A Seal
Full View Of Front & Back LCD Screens
Modular GDome System
The entire GDome can be disassembled using the Alan Key provided
As new cameras become available, you can upgrade the BackPlate only – no need to buy a completely new dome!
The GDome is super easy to disassemble and reassemble, no vice required!

*Colour and finish BackPlate might vary from images on site*

**If wanting a specific colour, please contact us when placing your order**

100% PROUDLY SOUTH AFRICAN! DESIGNED, ASSEMBLED AND TESTED IN SOUTH AFRICA.

Made to be used with GoPro® Hero 4 | 3+ | 3 | Hero+ and Hero Slimline Housing.

Please note you can use a Hero 3 in a GoPro® Hero [ 3+ or 4] Slimline Waterproof Camera Housing.

GDome PDS V3.0 GoPro Dome Port for Hero 4 / 3+ / 3