Skip to content

How to Film Kiteboarding: The Complete Kite Line Camera Mount Guide

You land the biggest jump of your session, get home, and the footage is spinning, shaking and unwatchable. Most kiteboarders have been there. The fix is mounting the camera in the right place, on the right mount, with the right settings. This guide covers all three.

GDome Kite Line Mount holding a GoPro on a kite line

Why the kite line is the best camera position

Helmet, board and harness mounts all have their place, but a camera on the kite line gives you something none of them can: you, your board and the water in one frame, from an elevated angle that looks like a drone shot. And you ride hands-free.

The catch is balance. If the camera sits off-centre it twists and spins on the line. A mount that holds the camera dead-centre stays steady, even in gusts. That is what the GDome Kite Line Mount is designed to do.

How to set up a kite line camera mount

Kite Line Mount with line inserts

  1. Attach the camera. Clip your GoPro or action camera into the mount's GoPro-style fitting and check it's secure.
  2. Fit the mount to the centre line. The mount is designed for 1.75 to 2 mm centre lines and clips on without tools in under a minute.
  3. Set the height. Start around 2 to 3 metres above the bar. Closer gives a tighter rider shot; higher gives a wider, more aerial view.
  4. Tether it. Add a leash from the camera or mount to your bar so nothing ends up on the seabed if it ever comes loose.
  5. Record before launch. Start recording on the beach. You'll get the launch and won't miss the start of your session.

Tip: most camera losses happen while landing, not riding. Tell whoever catches your kite that there's a camera on the lines.

Best GoPro settings for kite line footage

Setting Recommendation Why
Resolution 4K or 2.7K Room to crop and reframe in editing
Frame rate 60 fps Smooth slow motion for jumps and tricks
Stabilisation HyperSmooth on Removes vibration from the lines
Horizon levelling On, if your camera has it Keeps the horizon flat as the kite moves
Lens / field of view Wide or SuperView Fits rider, kite and water in frame
White balance Auto, or about 5500 K Handles changing light on the water
Colour profile Flat (advanced users) More flexibility when grading

Four shots to try

  • The classic rider shot: mount 2 to 3 m up, angled slightly down. Full body, board and wake.
  • The jump shot: move the mount higher. On big airs you'll see the board rise above the horizon.
  • The side-on trick angle: turn the camera to face across your direction of travel for grabs and handle passes.
  • Golden hour: shoot in the hour before sunset with the sun behind you. Even cruising looks good.

Safety checks before you ride

  • Your safety release must work. The Kite Line Mount is designed so the lines slide freely through it in an emergency, so your safety system works as normal. Test your release on the beach with the mount fitted before you ride.
  • Always tether the camera. Every session.
  • Check your setup. Bars and depower systems differ, so test with your own kite and bar.
  • Start easy. Do your first session with the mount in clean, steady wind.

Quick editing tips

  • Stabilise first. If you forgot HyperSmooth, GoPro Quik, CapCut and DaVinci Resolve all have stabilisation tools.
  • Cut hard. Keep the jumps, tricks and crashes. A tight 60-second edit beats five minutes of cruising.
  • Use slow motion sparingly. Slow down just the peak of a jump, then return to normal speed.
  • Grade for the water. A little extra blue and warm highlights stop ocean footage looking flat.

Compatibility

  • GoPro Hero 2 to Hero 13, including the Hero 11 Mini
  • DJI Osmo Action 3, 4, 5 and 6
  • Most action cameras with a standard GoPro-style mount

Need spares? Kite Line Mount replacement inserts are available. Want a second angle? Add a kite fin mount.

Filming in the water too?

For surf and water shots between sessions, a dome gives you split shots and clearer footage. See the GDome SuperDive for GoPro Hero 9 to 13, the GDome Mobile for phones, and our guide to what a GoPro dome does.

FAQ

Will a kite line mount affect my safety release?

The Kite Line Mount is designed so the lines slide freely through it, so your safety release works as normal. Always test it on the beach with the mount fitted.

Which cameras does it fit?

GoPro Hero 2 to Hero 13 (including the Hero 11 Mini), DJI Osmo Action 3 to 6, and most action cameras with a GoPro-style mount.

How far up the lines should it go?

Start at about 2 to 3 metres above the bar and adjust after watching your first session's footage.

My footage is still shaky. What's wrong?

Check the camera is centred in the mount and the mount is on the centre line. Turn on HyperSmooth and horizon levelling if your camera has it.

Is there a warranty?

Yes, the Kite Line Mount has a lifetime warranty. Its flexible polymer body bends under load instead of snapping.

Shop the Kite Line Mount (buy 1, get 1 free)

Next article Underwater Photography With Your Smartphone: A Beginner's Guide