GDome SuperDive: Dome Port Housing for GoPro Hero 9, 10, 11, 12 and 13 (40 m)
The GDome SuperDive is a dome port housing for the GoPro Hero 9, 10, 11, 12 and 13 Black. It comes with its own removable dive housing, and each unit is individually pressure tested to 40 m (130 ft). Use the dive housing on its own for snorkelling and diving, or clip it into the dome for over-under split shots, surf and pool work.

Quick facts
- Fits: GoPro Hero 9, 10, 11, 12 and 13 Black
- Depth: individually pressure tested to 40 m / 130 ft
- Includes: removable SuperDive dive housing (also 40 m)
- Dome: optically correct 6.1 inch acrylic dome
- Body: glass-filled nylon with marine-grade stainless steel screws
- Controls: full access to all housing buttons and a clear view of the rear screen
- Sealing: O-ring compression seals, no silicone or glue
- Price: from US$69
Why a dome port for a GoPro?
Behind a flat lens, water bends the light before it reaches the camera. You lose a big slice of the GoPro's wide field of view, and the corners go soft. A dome sits in front of the lens and corrects for that, so the camera sees close to its normal wide angle underwater. If you want the full explanation, read what a GoPro dome does and our comparison of flat ports and dome ports.
The dome also puts space between the lens and the water's surface. That is what makes the over-under (50/50 or split) shot possible: half the frame above the waterline, half below, both in focus. GoPros have a very deep depth of field, so you get that shot without the focus and exposure juggling a big camera rig needs.
The same gap helps above water. Spray that would cover a bare lens becomes small dots further from the camera, and particles in the water sit further from the lens, so underwater footage looks cleaner.
Why the SuperDive uses a separate dive housing
The Hero 9 and later cameras have a very shallow front lens, so there is nothing on the bare camera to seal against at depth. Front seals that press on the camera tend to leak as the backplate flexes under pressure.
So the SuperDive seals onto the side wall of its own dive housing, the same way our other dome ports seal. The camera goes into the dive housing, the dive housing slots into the dome, and the whole assembly is pressure tested to 40 m. It installs quickly and holds up in shore break.
Modular, and easy to maintain
The SuperDive comes apart with the Allen key supplied, with no vice or special tools. When new cameras come out, the design lets you replace the backplate rather than buy a whole new dome. Spare front seals are available if you ever need to replace one.
What's in the box
- SuperDive dome for Hero 9, 10, 11, 12 and 13 Black
- SuperDive removable dive housing (40 m)
- Stainless steel screws
- Allen key
- Camera lens seals (2)
- Dome-to-backplate O-ring seal (1)
Who it suits
- Snorkellers and divers who want sharper, wider GoPro footage down to 40 m.
- Surfers and bodyboarders shooting in the water, where a dome keeps drops and spray from ruining shots.
- Travel and content creators after split shots without a heavy camera housing.
Shooting a phone or a mirrorless camera instead? Look at the GDome Mobile for phones and the GDome XL for mirrorless and DSLR cameras. Still on a Hero 8? We make a SuperDive for the Hero 8 Black too.
Accessories worth adding
- Water Droplet Preventer gel stops drops sitting on the dome for clean split shots.
- Survival Camera Wrist Strap keeps the housing attached to you in waves.
- Dome Scratch Saver Cover protects the dome in your bag. More on that in how to protect your dome port from scratches.
- Side Grip handle for a steadier hold in the water.
Tips for your first session
- Check the O-rings are clean and seated before every session.
- Apply droplet preventer to the dome before you get in.
- For split shots, hold the dome about halfway into the water and keep the sun behind you.
- Rinse in fresh water after every saltwater session and dry it before storing.
Getting glare in the dome? See how to prevent reflections when using a dome port.
FAQ
Does the SuperDive fit the GoPro Hero 13?
Yes. It fits the Hero 9, 10, 11, 12 and 13 Black.
How deep can I take it?
Each SuperDive is individually pressure tested to 40 m (130 ft).
Can I use the dive housing without the dome?
Yes. The removable dive housing works on its own, also to 40 m.
Do I need a handle or trigger?
No. All the camera buttons are accessible through the housing. A side grip is optional.
Where is it made?
GDome products are made and shipped from South Africa.