Congratulations on buying the best Kite Line Mount out there!
Here are some basic step by step instructions to install our awesome mount onto your 4 / 5 Line Kite.
This is what you will get with your package.
1 x Kite Line Mount
1 x Low Profile Nut And Bolt
2 x Line Lock Off Arms
Step 1)
Attach your camera
The camera will fit perfectly into the mounting bracket, make sure it is facing the correct direction - lens facing away from the mount.
Slide the bolt into the mount, hold the nut in the recess, finger tighten the bolt.
Make sure the camera is angled correctly.
Take a screwdriver and tighten the bolt as much as possible, the camera should now not be able to move.
You can use a thumbscrew, however we like to use the low profile bolt as there is no way for lines to catch or wrap.
Step 2)
Find the split in your lines - follow this split until the shape of the lines match the shape of the mount.
Step 3)
Insert the lines into the Line Lock Off Arms
Step 4)
Insert the Line Lock Off Arms into the mount, BE SURE TO REVERSE the Arm so that the line is not facing the open slot (if you do this the wrong way, your mount will fall off the lines!
Push the Arms in as far as possible, they will be locked in place.
Step 5)
(Only If you have our new Velcro Safety Strap)
Make sure to put it on this exact position, that way it locks in the lines
Removing the Arms
Put your finger into the strings attached to the arms, hold the mount and pull until the arm comes out.