GDome XL 2-Stage Side Trigger System (Fusion Grip)
The GDome XL 2-Stage Side Trigger System is a wireless (magnetic) camera control grip designed to give you precise, responsive shutter control while shooting in demanding water environments.
It features a two-stage trigger mechanism, allowing you to half-press to focus and fully press to fire the shutter, just like a professional remote camera trigger. This gives you accurate control over timing and focus, which is especially important in fast-moving surf and action conditions.
The system uses a wireless (magnetic) trigger hub mounted inside the housing, meaning there are no external cable holes that could compromise waterproofing. The hub communicates with your camera via an internal wired 2.5mm trigger connection, ensuring reliable and consistent performance.
The side-mounted Fusion grip is designed for a stable two-handed shooting position, improving balance, reducing shake, and giving you more control over your framing compared to one-handed setups.
Focus and shutter trigger points are fully adjustable, allowing you to fine-tune responsiveness to your shooting style and camera setup. The internal hub is secured using high-quality 3M tape or click-lock tape, and can also be permanently fixed with epoxy for users who prefer a permanent installation.
Built for surf and underwater use, the system is rugged, waterproof, and designed to perform in challenging conditions where timing and stability matter most.
The Fusion trigger system is made with a combination of 3D printing and resin moulding (please allow for colour and finish variations).
The Fusion side shutter system is extremely strong, will not affect the waterproofing of the XL housing (its triggering mechanism is wireless / magnetic), is rated as IP69K, is fully waterproof, and will not trigger at depth.
Focus and shutter points will need to be set by the user by placing the shutter hubs at the corresponding points as per the installation instructions.
You can use gloves with this trigger system.
Please ensure that you always rinse your trigger thoroughly in fresh water after use.
Includes:
1 x 2-Stage Side Trigger System (Fusion Grip)
1 x Wireless two-stage trigger hub
2 x Mounting screws
2 x Lock nuts
Why a dome port
The difference between a holiday snap and the shot everyone asks about.
| Flat port | GDome | |
|---|---|---|
| Split-shots | Waterline won't hold | Clean over-under frame |
| Field of view | Cropped ~25% (1.33× zoom) | Full wide angle restored |
| Corners | Soft, stretched, fringed | Sharp edge to edge |
| Close-up wide | More water, more haze | Get close, keep colour |
A flat port gives you a thin sliver of waterline that collapses the moment you move. A large dome gives the waterline room, so the reef below and the boat and sky above sit in one frame — sharp on both sides.
Water bends light at a flat port, so your lens acts about 1.33× longer and you lose roughly a quarter of the view. The dome cancels that refraction, so the wide angle you paid for is the wide angle you get underwater.
Flat ports smear the edges of the frame: soft corners, stretched subjects and colour fringing. The curved dome keeps light hitting the lens evenly, so the edges stay as clean as the centre.
Every metre of water between lens and subject costs you colour and contrast. A dome lets you shoot wide from arm's length, so there's less water in the way — punchier colour, less haze, less backscatter.
Shot on GDome
Real shots from the GDome community. Tap a photo to shop the setup.
“The membrane back plate system has been a game changer for me. Being able to change settings as the light changes is when the best work happens.”
Pierre De Villiers — @pdvimages, South AfricaFeatured on